Cuprinol Stain Stripper
Available in:
2.5L
£57.32
Inc. VAT
£47.77
Ex. VAT
Cuprinol Stain Stripper is an effective way to remove flaking & peeling woodstain from previously stained decking. It prepares the surface before applying a Cuprinol decking oil or stain.
For previously stained wood
Prepares wood for staining or oiling
Water based
Cuprinol Stain Stripper is an effective way to remove flaking & peeling woodstain from previously stained decking. It prepares the surface before applying a Cuprinol decking oil or stain.
For previously stained wood
Prepares wood for staining or oiling
Water based
![Image title](https://www.duluxdecoratorcentre.co.uk/content/files/uk/images/pages/360/under%2025%20POS%20web%20(1).jpg)
To ensure compliance with the law Dulux Decorator Centre will not sell this product to any person who is or appears to be under 18 years of age. So, if you’re fortunate enough to look under 25 years of age, please do not be offended if asked for ID.
Description
Cuprinol Stain Stripper is an effective way to remove any previous coatings from your deck.
Technical/Safety Info.
Product Type | Special product |
Short Description | Removes previously applied woodstain from decks |
Suitable Surface | Wood |
Coverage | A 2.5L can covers upto 10m2 with 1 coat.Coverage can vary depending on application and the condition and nature of the surface |
General No. of Coats | 1 |
Application description | Stir thoroughly before use. Wearing suitable protective gloves, apply by brush, ensuring a generous even coverage. Leave until previous coating begins to blister and test scrape area at intervals to see if the bare deck begins to show. If required, the product can be left for up to 4 hours to maximise penetration through all of the paint layers. Remove with a stripping knife. Use water to clean surface, or white spirit to avoid raising the grain of the wood. Collect waste and dispose of safely. Should any paint remain please repeat the process before finishing with an appropriate Cuprinol oil or stain. Do not apply in temperatures below 5 degrees Celsius or if rain is likely before the job is complete. |
Cleaning | Remove excess product from tools before cleaning with soapy water |
Disposal | Don't waste unwanted paint! Leftover product may be taken to a Community RePaint collection point. Make a small difference to someone else at communityrepaint.org.uk |
Datasheets & Downloads
Delivery
estimated delivery/collection in 3 working days