Cuprinol Shed & Fence Protector (FP)
Available in:
5L
From
£46.38
Inc. VAT
£38.65
Ex. VAT
Cuprinol Shed & Fence Protector(FP) is a lightly tinted formulation that penetrates deep into the wood to give natural, rustic looking colour to both rough sawn and smooth planed timber. Its traditional solvent-based formulation also contains water repellents to help resist rain penetration.
Adds natural colour and protection
Water proofs
Solvent based
Cuprinol Shed & Fence Protector(FP) is a lightly tinted formulation that penetrates deep into the wood to give natural, rustic looking colour to both rough sawn and smooth planed timber. Its traditional solvent-based formulation also contains water repellents to help resist rain penetration.
Adds natural colour and protection
Water proofs
Solvent based
Description
Cuprinol Shed & Fence Protector(FP) is a lightly tinted formulation that penetrates deep into the wood to give natural, rustic looking colour to both rough sawn and smooth planed timber. It also contains water repellents to help resist rain penetration.
Technical/Safety Info.
| Product Type | Wood Stain |
| Short Description | Traditional waterproof protection |
| Suitable Surface | Wood |
| Coverage | 1L covers up to 6m2 with 2-3 coats,5L covers up to 30m2.Coverage can vary depending on application and the condition and nature of the surface |
| General No. of Coats | 2 |
| Application description | Shake tin well before use and frequently during use. This is important to achieve a uniform colour. Apply 2-3 uniform coats with a brush. Apply the second coat after the first has soaked in. The exact colour may be affected by any previous treatment and is darker on sawn, more absorbent, weathered and dark wood. Try a representative area first, to ensure acceptable appearance when dry. Protect plants during application. Allow treated fences etc. to dry thoroughly before refixing plants. Do not splash on plastic, plaster, paint or masonry. Do not spill on asphalt, bitumen, bitumen felt, tar or mastics. Bitumen, rubber and some plastic based materials may soften or swell in contact with the fluid or solvent vapour. |
| Cleaning | Remove as much product as possible from equipment before cleaning.For best results ise Polycell brush cleaner |
| Storage | Do not use or store in extremes of temperature |
| Disposal | Don't waste unwanted paint! Leftover product may be taken to a Community RePaint collection point. Make a small difference to someone else at communityrepaint.org.uk |
