Sikkens Cetol Filter 7
Available in:
1L
2.5L
5L
From
£47.40
Inc. VAT
£39.50
Ex. VAT
Cetol Filter 7 is a highly durable, medium build, solvent-borne woodstain that provides a highly translucent, satin finish and offers outstanding protection from the damaging effects of sunlight. Highly translucent to bring out the beauty of woodgrain, 5 year maintenance cycle, Excellent resistance to UV radiation, Microporous and water-repellent and very easy application and maintenance.
Highly translucent to bring out the beauty of woodgrain
5 year maintenance cycle
Excellent resistance to UV radiation
Microporous and water-repellent
Very easy application and maintenance
Cetol Filter 7 is a highly durable, medium build, solvent-borne woodstain that provides a highly translucent, satin finish and offers outstanding protection from the damaging effects of sunlight. Highly translucent to bring out the beauty of woodgrain, 5 year maintenance cycle, Excellent resistance to UV radiation, Microporous and water-repellent and very easy application and maintenance.
Highly translucent to bring out the beauty of woodgrain
5 year maintenance cycle
Excellent resistance to UV radiation
Microporous and water-repellent
Very easy application and maintenance
Description
Cetol Filter 7 is a highly durable, medium build, solvent-borne woodstain that provides a highly translucent, satin finish and offers outstanding protection from the damaging effects of sunlight. Highly translucent to bring out the beauty of woodgrain, 5 year maintenance cycle, Excellent resistance to UV radiation, Microporous and water-repellent. Very easy application and maintenance.
Technical/Safety Info.
| Product Type | Wood Stain |
| Short Description | A highly durable, medium build, solvent-borne woodstain that provides a highly translucent, satin finish and offers outstanding protection from the damaging effects of sunlight. |
| Drying time (recoat) | 16 hours |
| Drying time (touch dry) | 3 hours |
| Suitable Surface | Shutter, Window frames, Wood, Windows, Door frames, Doors |
| Coverage | 16 m²/L |
| General No. of Coats | 2 |
| Application description | Ensure product is thoroughly stirred before and during application, otherwise sheen and colour variations may be experienced. Cetol Filter 7 plus is supplied ready for use. Do not thin. Cetol HLS plus should be used as a basestain for joinery items prior to coating with Cetol Filter 7 plus. For best results use a good quality, long-haired soft bristle brush.The product should be applied in a full flowing coat, laying off in the direction of the grain, using the minimum number of brushstrokes necessary to produce an acceptable finish. Avoid overbrushing, as this will reduce the protection afforded. Applyto a minimum wet film thickness of 55 micrometres. Conditions - Do not apply if there is a risk of rain, or when air/substrate temperatures are below 5ºC or above 30ºC during application or drying periods. Protect from frost and rain until dry.Failure to meet these requirements may adversely affect the drying, visual quality and durability of the finish.Two coats of Cetol Filter 7 plus should be applied, allowing a minimum of 16 hours drying time between coats. On new work, where practical, the first coat should be applied all round prior to fixing. Pay special attention to any areas of exposed end grain,tops and bottoms of doors, and undersides of cills. The second coat should be applied to all exposed surfaces, as soon as possible after the first coat has dried, but no sooner than 16 hours. |
| Cleaning | Cleaning After Final Use: Clean brushes and rollers immediately after final use to reuse them for future projects, saving you money and reducing waste. Cleaning Steps: 1. Remove Excess Product: Scrape off leftover product into a container for reuse. 2. Use Brush Cleaner: Use a Brush Cleaner to clean brushes and rollers. 3. Reuse Brush Cleaner: Allow the paint solids to settle and reuse the cleaner by pouring the clear liquid into another container. 4. Dry Naturally: Let tools air-dry and store in a dry, dust-free area. Dispose Responsibly: Dispose of the remaining solids and used brush cleaner at a hazardous waste facility. Do not pour any solvent-based paint, brush cleaner or washings down the drain or onto the ground. Do not flush paint down the drain, including when cleaning painting tools |
| Storage | Storing & Responsible Disposal Do not use or store in extreme temperatures and protect from frost. Whenever possible, reuse, recycle, or donate leftover paint. Find local services at recyclenow.com. If no Community RePaint service is nearby, consider advertising paint locally—many good causes need it to brighten community spaces. Dispose Responsibly: Never pour paint or waste washings down drains or sinks. Follow instructions at recyclenow.com to recycle empty packs. Reuse Roller Cages: Remove sleeves and store cages in a dry, dust-free place. If brushes or sleeves cannot be cleaned or reused, dispose of them in general waste to avoid recycling issues. Paint Washings: Collect used brush cleaner in a container; don't pour it into drains or on the ground. Let solids settle, pour off clear liquid into another container for reuse or disposal. Dispose of remaining solids and used cleaner at a hazardous waste facility. Do not flush paint down drains, including when cleaning tools. |
Reviews
Datasheets & Downloads
- Sikkens Cetol Filter 7(TDS) cetol_filter_7_plus.pdf
- Sikkens Cetol Filter 7(CLP MSDS) si_gb_en_cetol_filter_7_plus_009.pdf
- Sikkens Cetol Filter 7(CLP MSDS) si_gb_en_cetol_filter_7_plus_006.pdf
- Sikkens Cetol Filter 7(CLP MSDS) si_gb_en_cetol_filter_7_plus_020.pdf
- Sikkens Cetol Filter 7(CLP MSDS) si_gb_en_cetol_filter_7_plus_045.pdf
- Sikkens Cetol Filter 7(CLP MSDS) si_gb_en_cetol_filter_7_plus_048.pdf
- Sikkens Cetol Filter 7(CLP MSDS) si_gb_en_cetol_filter_7_plus_base_tu.pdf
- Sikkens Cetol Filter 7(CLP MSDS) si_gb_en_cetol_filter_7_plus_010.pdf
- Sikkens Cetol Filter 7(CLP MSDS) si_gb_en_cetol_filter_7_plus_077.pdf
- Sikkens Cetol Filter 7(CLP MSDS) si_gb_en_cetol_filter_7_plus_085.pdf