Polycell Trade Easy Sand Interior Filler
Available in:
2KG
5KG
10KG
From
£13.58
Inc. VAT
£11.32
Ex. VAT
Polycell Easy Sand Interior filler sands down easily and gives a perfect finish for repairs to most indoor building materials.
Mixes to a smooth consistency and is easy to sand
Remains workable for up to 1.5 hours depending on temperature, humidity and depth of area filled
Low shrinkage
Suitable for repairs to most indoor building materials including plaster, plasterboard,wood, brick and stone. Use it to fill cracks and holes in walls and ceilings, around doors, window frames and skirting’s.
Polycell Easy Sand Interior filler sands down easily and gives a perfect finish for repairs to most indoor building materials.
Mixes to a smooth consistency and is easy to sand
Remains workable for up to 1.5 hours depending on temperature, humidity and depth of area filled
Low shrinkage
Suitable for repairs to most indoor building materials including plaster, plasterboard,wood, brick and stone. Use it to fill cracks and holes in walls and ceilings, around doors, window frames and skirting’s.
Description
Polycell Easy Sand Interior filler sands down easily and gives a perfect finish for repairs to most indoor building materials.
Technical/Safety Info.
| Product Type | Filler |
| Short Description | Interior filler which sands down easily and gives a perfect finish for repairs to most indoor building materials. |
| Drying time (recoat) | 3.5 hour |
| Drying time (touch dry) | 3.5 hour |
| Suitable Surface | All |
| General No. of Coats | 1 |
| Application description | Mixing - When mixing by volume add 2 parts Polycell Trade Easy Sand Interior Filler to 1 part water. Mix thoroughly to form a smooth paste, adding more water or powder as necessary. Approximately 3L of water is required to mix a full 5 Kg bag and approximately 6L of water is required to mix a full 10 Kg bag. NB: Always use clean tools when mixing a new batch of filler. Application - Apply with a filling knife and smooth off with a wet blade. Setting occurs in approximately 3.5 hours depending on temperature, humidity and depth of area filled. Completion- If required, rub down with abrasive paper when fully dry. Can be over painted when dry. Clean tools and utensils in warm water immediately after use. Dependant on paint type visibility can increase. For best results to reduce visibility of filler through paint, use two top coats. |
| Cleaning | Clean tools and utensils in warm water immediately after use. |
| Disposal | Excess product can be left to fully cure and disposed of in a bin. |