Hammerite High Heat Paint
Available in:
400ML
£19.48
Inc. VAT
£16.23
Ex. VAT
Hammerite High Heat Paint is a durable, heat resistant protective finish specially formulated to withstand temperatures up to 600°C. Ideal for fire surrounds, boilers, pipework and anywhere a high temperature paint is required
Resists temperatures of up to 600°C
Resists cracking and flaking
No primer required
Quick drying.
Solvent based
Hammerite High Heat Paint is a durable, heat resistant protective finish specially formulated to withstand temperatures up to 600°C. Ideal for fire surrounds, boilers, pipework and anywhere a high temperature paint is required
Resists temperatures of up to 600°C
Resists cracking and flaking
No primer required
Quick drying.
Solvent based
Description
Hammerite High Heat Paint is a durable, heat resistant protective finish specially formulated to withstand temperatures up to 600°C. Ideal for fire surrounds, boilers, pipework and anywhere a high temperature paint is required
Technical/Safety Info.
Product Type | Paint |
Short Description | Hammerite:Ultimate metal protection. |
Drying time (recoat) | 15 minutes |
Drying time (touch dry) | 30 minutes |
Suitable Surface | Metal |
Coverage | 400ml covers up to 1 square metre |
General No. of Coats | 4 |
Application description | Switch off all ignition sources. Ensure surface is cool before and during spraying. Ideal application temperature range is 8-25°C. Mask off the surrounding area to protect from overspray. To ensure optimum performance store the aerosol at room temperature for at least 2 hours prior to use. Prior to use shake the can vigorously until the agitator ball is heard and then for a further 3 minutes.To avoid runs and sags spray in light even strokes from a distance of about 15cm. Spray a light covering-coat. When touch dry (about 30 minutes) apply a further 2-3 coats, allowing 15 minutes between each coat. After application leave the painted surface to dry overnight. Turn aerosol upside down and spray for 2 seconds in between coats and after final use. |
Flame, Exclamation mark Danger Contains Acetone. Extremely flammable aerosol. Pressurised container: May burst if heated. Causes serious eye irritation. May cause drowsiness or dizziness. Keep out of reach of children. If medical advice is needed, have product container or label at hand.Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Do not get in eyes, on skin, or on clothing. Do not pierce or burn, even after use. IF INHALED: Remove person to fresh air and keep comfortable for breathing. Call a POISON CENTER or doctor if you feel unwell. Protect from sunlight. Do not expose to temperatures exceeding 50 degrees C/122 degrees F. Dispose of contents and container in accordance with all local, regional, national or international regulations. Repeated exposure may cause skin dryness or cracking.
Datasheets & Downloads
Delivery
estimated delivery/collection in 3 working days