Dulux Trade Weathershield Fungicidal Wash

https://msp.images.akzonobel.com/prd/dh/eukddc/packshots/e0f88df9e4d06c93831442239b124180.png

Available in: 5L

Checking availability

£31.54 Inc. VAT

                    
    £26.28
        Ex. VAT

Dulux Trade Weathershield Fungicidal Wash is designed for cleaning all bare or painted wood and masonry surfaces contaminated with moulds, algae and fungi. Suitable for brush or low pressure (non-atomising) spray application only.

Kills Algae and mould growth

For wood and masonry surfaces

Water based

Kills Algae and mould growth

For wood and masonry surfaces

Water based

Description

Technical/Safety Info.

Technical information

Product Type	Cleaner
Short Description	A fungicidal wash for cleaning wood and masonry surfaces
Suitable Surface	Wood
Coverage	Up to 5m² per litre
General No. of Coats	0
Application description	Application: by brush or low pressure (non-atomising) spray to all affected areas. Leave until dry (minimum 1 hour), then remove any dead growth with brush or by washing the treated area; failure to do this may result in discolouration of subsequently applied coatings. Repeat the process if necessary. On badly affected areas the use of high pressure water-hosing may be necessary to remove all organic growth completely. Do not apply in wet weather.
Cleaning	After use, remove as much wash as possible from brushes before cleaning with water.
Storage	Do not use or store in extremes of temperature and protect from frost.
Disposal	STATUTORY CONDITIONS OF APPROVAL RELATING TO USE: Contains: DIDECYL DIMETHYL AMMONIUM CHLORIDE (DDAC) 0.4%w/w. Apply at a rate of 200mls/m2. This 5L bottle will clean 25m2. READ ALL PRECAUTUIONS BEFORE USE. Users must comply in full with all their legal responsibilities under the Control of Pesticides Regulations 1986 (as amended), including complying with all conditions of approval HSE No. 10961 PCS No : 102100. For use only as a surface biocide. AL, other liquid to be applied undiluted.