20% off event* | 12th - 18th November

Cuprinol All Purpose Wood Filler

0 reviews Write a review
Available in 310ML | 500ML
Colours: Dark, Natural
From
£7.56 Incl. VAT
£6.30 Excl. VAT
Cuprinol All Purpose Wood Filler is a tough, durable wood filler for small repairs. Specifically formulated to flex with the natural movement of the wood. It can be sanded, painted, stained or varnished when dry. It is not suitable for gaps between floor boards. It is easier and more pleasant to use because of its solvent free and low odour non flamable formulation.
Cuprinol All Purpose Wood Filler is a tough, durable wood filler for small repairs. Specifically formulated to flex with the natural movement of the wood. It can be sanded, painted, stained or varnished when dry. It is not suitable for gaps between floor boards. It is easier and more pleasant to use because of its solvent free and low odour non flamable formulation.

Description

Cuprinol All Purpose Wood Filler is a tough, durable wood filler for small repairs. Specifically formulated to flex with the natural movement of the wood. It can be sanded, painted, stained or varnished when dry. It is not suitable for gaps between floor boards.

Technical/Safety Info.

Product Type Filler
Short Description For general purpose wood repairs prior to painting - interior and exterior
Drying Time 2 hours dependent upon temperature and humidity
Suitable Surface Wood
Application Description Ensure surfaces are clean and dry. Knead tube to mix contents. Apply using a wet filling knife, or using the cartridge, apply along or in the repair area, smoothing with a wet knife where necessary, leaving the filler slightly proud for sanding. For deep holes build up in layers, allowing each layer to dry. Leave proud and when completely dry (normally 2 hours) sand down and dust off. Tub: Stir well before use. Apply using a wet filling knife. For deep holes build in layers, allowing each layer to dry. Leave proud and when completely dry (normally 2 hours) sand down and dust off. Finish with stain, varnish or paint. When over painted, stained or varnished the filled area may differ in colour to the surrounding area; therefore we recommend filling and finishing a small test area first to ensure that the appearance is acceptable. Do not use with wood dye. Cartridge: Apply along or in the repair area, smoothing with a wet knife where necessary, leaving the filler slightly proud for sanding. For deep holes (greater than 5mm deep) build up in layers, allowing each layer to dry. Leave proud and when completely dry (normally 2 hours) sand down and dust off. Finish with stain, varnish or paint. When over painted, stained or varnished the filled area may differ in colour to the surrounding area; therefore we recommend filling and finishing a small test area first to ensure that the appearance is acceptable. Do not use with wood dye. For breaks in between filling release trigger on cartridge gun to avoid overspill.To get the best results with Cuprinol All Purpose Wood Filler, make sure surfaces to be filled are sound, clean and dry (new surfaces particularly must be fully dry).
Cleaning After use, remove as much product as possible from application equipment, before cleaning with cellulose thinners
Disposal Don't waste unwanted paint! Leftover product may be taken to a Community RePaint collection point. Make a small difference to someone else at communityrepaint.org.uk

Reviews (0)

There are no reviews yet.

Downloads

    AkzoNobel respects the privacy of your data

    We process personal data in compliance with GDPR. Please see our Privacy Statement for more information. AkzoNobel uses cookies to offer the basic functionality of the website, to tailor the content on social media and to generate user statistics using Google Analytics on anonymous basis to make our website more user friendly. Click on "I agree" to accept the cookies specified in the Cookie policy and go directly to the website or click on "Set cookie preferences" to indicate your preferences for cookies.

    Loading