Covid-19 statement update for our valued customers. Please note: For the time being, our stores remain closed to walk in customers

Sikkens Cetol Novatop

0 reviews Write a review
Available in: 2.5L 5L
From
£67.91 Incl. VAT
£56.59 Excl. VAT
This high solids, low solvent technology, one-coat finish for use over Cetol Novatech, gives a flexible weather-resistant semi-gloss finish for window and door joinery. The Cetol Novatech/Novatop two-coat system (equivalent to a traditional three-coat woodstain system) results in reduced application costs with no compromise on durability and performance.
Highly translucent to bring out the beauty of woodgrain
5 year maintenance cycle
One coat application and maintenance
Cost effective and labour saving
Excellent durability
This high solids, low solvent technology, one-coat finish for use over Cetol Novatech, gives a flexible weather-resistant semi-gloss finish for window and door joinery. The Cetol Novatech/Novatop two-coat system (equivalent to a traditional three-coat woodstain system) results in reduced application costs with no compromise on durability and performance.
Highly translucent to bring out the beauty of woodgrain
5 year maintenance cycle
One coat application and maintenance
Cost effective and labour saving
Excellent durability

Description

This high solids, low solvent technology, one-coat finish for use over Cetol Novatech, gives a flexible weather-resistant semi-gloss finish for window and door joinery. The Cetol Novatech/Novatop two-coat system (equivalent to a traditional three-coat woodstain system) results in reduced application costs with no compromise on durability and performance.

Technical/Safety Info.

Product Type Wood Stain
Short Description A high-solids, highly durable, solvent-borne woodstain with a translucent, semi-gloss finish. A one coat application for windows and doors.
Drying time (touch dry) 5-6 hours
Suitable Surface Wood
Coverage 16 m²/L
General No. of Coats 2
Application description Ensure product is thoroughly stirred before and during application, otherwise sheen and colour variations may be experienced. Cetol Novatop is supplied ready for use. Do not thin.Cetol Novatech should be used as a basestain for joinery items prior to coating with one coat Cetol Novatop. For best results use a good quality, long-haired, soft bristle brush. On new work, where practical, the initial coat should be applied all round prior to fixing. The product should be applied in a full flowing manner in the direction of the grain, using the minimum number of brushstrokes necessary to produce an acceptable finish. Pay special attention to any areas of exposed end grain, tops and bottoms of doors, and undersides of cills. Avoid overbrushing, as this will reduce the protection afforded.Conditions - Do not apply if there is a risk of rain, or when air/substrate temperatures are below 5ºC or above 30ºC during application or drying periods. Protect from frost and rain until dry.Failure to meet these requirements may adversely affect the drying, visual quality and durability of the finish. Apply to a minimum wet film thickness of 60 micrometres.coat. Allow a minimum of 12-24 hours drying time. If applied to exterior timber and the contract is of long duration, it is suggested that a further coat be applied prior to handover to make good any weathering during the construction period
Cleaning Clean brushes and equipment with brush cleaner immediately after use. If spilled, Cetol Novatop may be removed immediately while still wet ,using white spirit
Storage Store in cool, dry, frost-free conditions

Reviews (0)

There are no reviews yet.

Colour Tints

Please be aware that within the colour tinting system not every colour is available to be tinted across all brands and all finishes. Once your order has been placed, a representative from your local DDC store will contact you via telephone to discuss the specific details of your colour order.

Downloads

    Loading