Free 
Hammerite Red Oxide Primer
Available in:
250ml
500ml
From
£8.17
Incl. VAT
£6.81
Excl. VAT
Hammerite Red Oxide Primer is specially formulated for use on both bare and rusty iron and steel.For aluminium, galvanised and all other non-ferrous metals, use Hammerite Special Metals Primer
A high performance anticorrosive formulation
Quick drying.
Can be used inside or outside
Use on gates,railings and metal drainpipes
Solvent based
Hammerite Red Oxide Primer is specially formulated for use on both bare and rusty iron and steel.For aluminium, galvanised and all other non-ferrous metals, use Hammerite Special Metals Primer
A high performance anticorrosive formulation
Quick drying.
Can be used inside or outside
Use on gates,railings and metal drainpipes
Solvent based
Description
Hammerite Red Oxide Primer is specially formulated for use on both bare and rusty iron and steel.For aluminium, galvanised and all other non-ferrous metals, use Hammerite Special Metals Primer
Technical/Safety Info.
| Product Type | Primer |
| Short Description | Hammerite:Ultimate metal protection. |
| Drying time (recoat) | 6 hours |
| Drying time (touch dry) | 2 hours |
| Suitable Surface | Metal |
| Coverage | 12m2per litre |
| General No. of Coats | 2 |
| Application description | Stir paint thoroughly. For best results when applying by roller, use a short pile mohair roller. Apply 2 coats of Hammerite Red Oxide Primer, allowing a minimum of 6 hours between coats. A topcoat may be applied after a minimum of 6 hours. For best results, allow 24 hours. Hammerite Red Oxide Primer can be overpainted with most paints. |
| Cleaning | Remove as much paint as possible from equipment before cleaning. For best results use Hammerite Brush Cleaner & Thinners. Hammerite Red Oxide Primer should be stored in a dry well ventilated area. Protect from frost, extremes of temperature and direct sunlight |
Reviews (0)
There are no reviews yet.
